CN3 Backlight Configuration

  1. Home
  2. Knowledge Base
  3. Mobile Computer
  4. Intermec CN3
  5. CN3 Backlight Configuration

Configuring the Backlight on your Intermec CN3

By default, the CN3 goes into Screen Off mode when there is no activity on the computer. Screen Off mode turns off the backlight and display. Press a key or tap the screen with the stylus to resume activity.

It is possible to override the backlight settings by changing the power management settings.

To configure the backlight

  1. Tap Start > Settings > the Systems tab > the Backlight icon > the Battery Power tab.
  2. With Turn off Backlight if device is not used for checked, select the timeout value (10 seconds, 30 seconds or 1 to 5 minutes).




Was this article helpful?

Related Articles