Intermec CK3 Power Button
When you briefly press the power button on your Intermec CK3 you put the device into suspend mode. In this lower power mode, the CK3 continues to supply power to all memory, but turns off power to most of the hardware such as the display. This power saving feature is designed to prolong battery life.
When you press the power button to turn the device back on, your computer resumes at the screen that was displayed when you turned it off.
Note: If you are using WPA or 802.1X security, the CK3 may need to reauthenticate before it resumes your application.
If the battery flashes and your CK3 does not resume after pressing the power button, your battery may be too low to supply power and will need to be replaced.