X3 MicroSD Card

Datalogic Falcon X3 Micro SD Card

Your Datalogic Falcon X3 provides the possibility to add a Micro SD memory storage card. To access the Micro SD card slot and insert the card, proceed as follows:

1. Turn off your Datalogic Falcon X3.
2. Press the latch release and lift the battery from the device.
3. Open the Micro SD card slot by pulling up the locking plate.
4. Insert the Micro SD card with the written part upward. Lock the card into place by pushing the cardholder down.
5. Replace battery.

To remove the Micro SD card from your Datalogic Falcon X3, follow the steps above to access the SD card are and remove it from its slot.