Understanding your Intermec SR61B Status Lights and Alerts
Status Lights
The status light flash green or red to indicate the status of the Intermec SR61 Scanner and/or battery. Status information is sometimes shown even if the Intermec Ready-to-Work Indicator is on. This way the scanner can communicate more than one type of information at the same time.
Example: While the blue LED is on to show that there is a Bluetooth connection, the scanner will flash green when you have successfully scanned a bar code.
Default Status Light Description:
Beeps and Vibrate Alert:
Your Intermec SR61B beeps to give you audio feedback and vibrates when performing some functions.
Example: You will hear a beep each time you scan a valid barcode.
Beeps and Vibrate Alert:
The Intermec SR61B beeps to give you audio feedback and vibrates when performing some functions.
Example: You hear a beep each time you scan a valid bar code.
Default SR61B Beep and Vibrate Alert Descriptions:
Using Vibrate Alert:
You can configure your Intermec SR61B to vibrate when it successfully decodes a bar code. This feature can be useful in these situations.
- You are in a noisy environment, such as a busy warehouse, where it can difficult to hear the beep.
- You are working in a quiet environment, such as a library, where you do not want to make a lot of noise.