MC9596 Screen Calibration

  1. Home
  2. Knowledge Base
  3. Mobile Computer
  4. Motorola MC9596
  5. MC9596 Screen Calibration

Calibrating the Screen on your Motorola MC9596

Calibrating the Screen:

Note: The Calibration screen can be accessed by pressing CTRL key – BKSP key or tapping Start > Settings > Screen > Align Screen button.

To calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus:

  • Remove the stylus from its holder on the side of your Motorola MC9596.
  • Carefully press and briefly hold the tip of stylus on the center of each target that appears on the screen.
  • Repeat as the target moves around the screen, then tap the screen to continue.

Was this article helpful?

Related Articles