MC65 Screen Calibration

  1. Home
  2. Knowledge Base
  3. Mobile Computer
  4. Motorola MC65
  5. MC65 Screen Calibration

Calibrating Your Screen on the Motorola MC65

Press the power button to turn on the MC65. The splash screen displays for about a minute as the MC65 initializes its flash file system, then the calibration window appears.

Note: The calibration screen can be accessed by pressing the Blue key and then the Backspace key.

Calibrating the screen:

To calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus.

  1. Remove the stylus from its holder on the side of the MC65.
  2. Carefully press and briefly hold the tip of the stylus on the center of each target that appears on the screen.
  3. Repeat as the target moves around the screen, then tap the screen to continue.

 

Was this article helpful?

Related Articles