Installing the microSD and SIM Card in your Motorola MC65
Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack.
Caution:Follow proper ESD precautions to avoid damaging the SD card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is grounded.
To install the microSD card:
- Remove the handstrap.
- Lift the rubber access door.
- Slide the SIM card holder door up to unlock.
- Lift the SIM card holder door
- Lift the microSD card holder door.
- Insert the microSD card into the card holder door ensuring that the card slides into holding tabs on each side of the door.
- Close the card holder door and push down until it is securely in place.
- Close the SIM card holder door and slide down until it locks in place.
- Close the rubber access door.
Installing the SIM Card
GSM phone service requires a Subscriber Identification Module (SIM) card. Obtain the card from your service provider. The card fits into the Motorola MC65 and can contain the following information.
- Mobile phone provider account details.
- Information regarding service access and preferences.
- Contact information, which can be moved to Contacts on the Motorola MC65.
- Any additional services to which you have subscribed.
To install the SIM Card:
- Lift the rubber access door.
- Slide the SIM card holder up to unlock.
- Lift the SIM card holder door.
- Insert the SIM card, as shown below, ensuring that the card slides into the holding tabs on each side of the door.
- Close the SIM card holder door and slide down to lock into place.
- Close the rubber access door.
- Install the battery.