WT4090 Screen Calibration

  1. Home
  2. Knowledge Base
  3. Mobile Computer
  4. Motorola WT4090
  5. WT4090 Screen Calibration

Calibrating the screen on your Motorola WT4090

To calibrate the touch screen on your Motorola WT4090 so the cursor on the touch screen aligns with screen taps:

  1. Press Start > Settings > Control Panel > Stylus icon > Calibration tab > Recalibrate button.
  2. Carefully press and briefly hold on the center of the Calibration screen target. Repeat the procedure as the target moves and stops at different locations on the screen. This enters the new calibration settings.
  3. Once all of the new calibration settings are input, tap the screen or press the ENTER button to save the new calibration settings. Press ESC to discard the new calibration settings.



Was this article helpful?

Related Articles