How to Align the Screen on your Motorola MC92N0
For the tip of the cursor on the MC92N0 mobile computer to align correctly with the tip of your stylus, a screen alignment and/or re-calibration may be necessary. To re-calibrate the MC92N0 screen at any time, press “FUNC” + “ESC” to launch the application.
The escape “ESC” key is on the top left below the screen, while the function “FUNC” button is the blue one on the far right:
You will see a target symbol appear.
- Carefully press and hold the tip of the stylus on the center of each target that appears on the screen.
- The target will then move to another section of the screen.
- Again, press and hold the tip of the style on the center of each target.
- Repeat as the target moves around the screen to finish calibration. If you need to exit and not save any changes, press ESC to cancel.
Still having issues with your MC92N0 screen alignment?
We fix scanners from the Zebra / Motorola / Symbol MC9200 series all day, every day. And there’s a MC9200 service plan for everyone. Contact us today for your free repair quote.