LS4278 Cradle Mount

  1. Home
  2. Knowledge Base
  3. Barcode Scanners
  4. Motorola LS4278
  5. LS4278 Cradle Mount

Understanding Your Motorola LS4278 Cradle

You should always insert your Motorola LS4278 in the cradle so that the metal contacts on the bottom of the scanner touch the contacts on the cradle. Push the handle lightly to ensure proper connection, engaging the contacts in the cradle and the scanner. Ensure the desk/wall mount converter knob on the back of the cradle is in the correct position for horizontal or vertical mounting.

Horizontal Cradle Mount

When mounting the cradle horizontally, where no fastening is necessary:

  • Ensure the rubber feet are attached to the cradle. These feet will provide traction and prevent surface damage.
  • Ensure the desk/wall mount converter knob is in the position shown below.

Horizontal Mount

Vertical Cradle Mount

When mounting the cradle vertically:

  • Ensure that the rubber feet are attached to the cradle. These feet will provide traction and prevent surface damage.
  • Ensure that the convertible mount hook on the front of the cradle is inserted with the hook facing up. If not, remove and reverse the hook so that it is in position to secure the scanner in place.
  • Ensure that the desk/wall mount converter knob is in the position shown.

Vertical Mount

 

 

 

 

 

 

 

Was this article helpful?

Related Articles